Cover Image

QR Code

Study on ECC injection modes in reflood tests with SCTF CORE II : comparison between gravity and forced feeds

Main Author:	Ohnuki, Akira
Corporate Author:	Japan Atomic Energy Research Institute
Other Authors:	Adachi, Hiromichi, Iwamura, Takamichi, Sobajima, Makoto
Published:	Tokai-mura, Naka-gun, Ibaraki-ken: Japan Atomic Energy Research Institute, 1991.
Subjects:	Reactor safety PWR-LOCA

Similar Items

2D/3D program work summary report.
Published: (1995)

Effects of radial core power profile on core thermo-hydraulic behavior during reflood phase in SCTF CORE-I forced feed tests Takamichi Iwamura ... [et al.].
by: Iwamura, Takamichi
Published: (1991)

Evaluation report on SCTF core-III test S3-22 : investigation of water break-through and core cooling behaviors under alternate ECC water delivery from hot legs to upper plenum during reflooding in PWRS with combined-injection type ECCS Tsutomu Okubo ... [et al.].
by: Okubo, Tsutomu
Published: (1991)

Assessment of TRAC-PF1/MOD1 code for thermal-hydraulic behavior in pressure vessel during reflood in SCTF test with a radial power distribution Akira Ohnuki, Hajime Akimoto, Yoshio Murao.
by: Ohnuki, Akira
Published: (1993)

Study on thermal-hydraulics during a PWR reflood phase Tadashi Iguchi.
by: Iguchi, Tadashi
Published: (1998)

An outcome of nuclear safety research in JAERI : case study for LOCA, FP, criticality and reprocessing Kazuaki Yanagisawa ... [et al.].
by: Yanagisawa, Kazuaki
Published: (2009)

A Study of Rapid Depressuration Action during PWR Vessel Bottom Break LOCA with HPI Failure and AIS-Gas Inflow (ROSA-V/LSTF Test SB-PV-06) Mitsuhiro Suzuki ... (et al.).
Published: (2007)

Evaluation report on CCTF core-II reflood test C2-1 (run 55) : effect of pressure on reflood phenomena Tadashi Iguchi ... [et al.].
by: Iguchi, Tadashi
Published: (1991)

Assessment of TRAC-BF1 1D reflood model with CCTF and SCTF data Hajime Akimoto ... [et al.].
by: Akimoto, Hajime
Published: (1993)

Safety functions and component classification for BWR, PWR and PTR : a safety guide.
Published: (1979)

Evaluation report on CCTF core-II reflood test C2-15 (run 75) : investigation of flecht-set coupling test results Tsutomu Okubo ... [et al.].
by: Okubo, Tsutomu
Published: (1992)

ROSA-V/LSTF vessel top head LOCA tests SB-PV-07 and SB-PV-08 with break sizes of 1.0 and 0.1% and operator recovery actions for core cooling by Mitsuhiro Suzuki, Takeshi Takeda and Hideo Nakamura.
by: Suzuki, Mitsuhiro
Published: (2010)

Injection molding : theory and practice Irvin I. Rubin.
by: Rubin
Published: (1972)

Injection moulding machines A. Whelan.
by: Whelan
Published: (1984)

Injection moulding materials A. Whelan.
by: Whelan
Published: (1982)

Stability analysis of external KINK mode for ITER L-MODE profile plasmas Shinji Tokuda, Takahisa Ozeki.
by: Tokuda, Shinji
Published: (1994)

Study of density fluctuation in L-mode and H-mode plasmas on JFT-2M by microwave reflectometer Kouji Shinohara.
by: Shinohara, Kouji
Published: (1997)

Simulation of a loss of coolant accident with hydroaccumulator injection.
Published: (1988)

Rosa-III tests on BWR pump suction-line 200% break locas with partial and total ECCS failure Hiroshige Kumamaru ... [et al.].
by: Kumamaru, Hiroshige
Published: (1991)

ITER neutral beam injection system : japanese design proposal Yoshihiro Ohara ... [et al.].
by: Ohara, Yoshihiro
Published: (1991)

Energy confinement and transport of H-mode plasmas in tokamak Hajime Urano.
by: Urano, Hajime
Published: (2005)

Pellet injection and toroidal confinement : proceedings of a technical committee meeting organized by International Atomic Energy Agency and held in Gut Ising, Federal Republic of Germany, 24-26 October 1988.
Published: (1989)

Comparison of entrance surface air kerma rate and image quality of two flat panel detectors in flouroscopy mode Wan Hazlinda Binti Ismail.
by: Wan Hazlinda Binti Ismail
Published: (2008)

The role of integer-mode rational surface on peaked profile formation in toroidal rotation velocity and ion temperature Yoshihiko Koide, Shin-ichi Ishida, Akira Sakasai.
by: Koide, Yoshihiko
Published: (1991)

Deisgn of neutral beam injection power supplies for ITER Kazuhiro Watanabe ... [et al.].
by: Watanabe, Kazuhiro
Published: (2000)

Simulation analysis of JT-60 pellet injection experiments Katsuhiro Shimizu ... [et al.].
by: Shimizu, Katsuhiro
Published: (1991)

Simulation of tearing mode stabilization by using ECH Gen-ichi Kurita ... [et al.].
by: Kurita, Gen-ichi
Published: (1993)

Stability analysis of ITER plasmas with H-mode profiles Shinji Tokuda, Takahisa Ozeki.
by: Tokuda, Shinji
Published: (1994)

Effect of the water matrices on the sorption of Cu(II), Cd(II). Pb(II) and Zn(II) by bentonite Nornikman Bin Mustafa.
by: Nornikman Bin Mustafa
Published: (2006)

Nuclear reactor instrumentation (in-core) James F. Boland.
by: Boland, James F.
Published: (1970)

Reactor core fuel management P. Silvennoinen.
by: Silvennoinen, P.
Published: (1976)

Reviews of experimental studies on various geometrical contact modes in vapor explosions Hyun-sun Park ... [et al.].
by: Park, Hyun-sun
Published: (1996)

Finite beta and compressibility effects on stability of resistive modes in toroidal geometry Jean-Noel G. Leboeuf, Gen-ichi Kurita.
by: Leboeuf, Jean-Noel G.
Published: (1998)

Local transport analysis of L-mode plasmas in JT-60 Tokamak Toshio Hirayama ... [et al.].
by: Hirayama, Toshio
Published: (1991)

Probabilistic safety assessments of nuclear power plants for low power and shutdown modes by International Atomic Energy Agency.
Published: (2000)

Measurement of water flow in closed conduits - tracer methods - part II : constant rate injection method using non-radioactive tracers International Organization for Standardization.
Published: (1975)

Electronics II : a textbook covering the original level II syllabus of the Technician Education Council D. C. Green.
by: Green, D. C.
Published: (1985)

Neutron irradiation of seeds II.
Published: (1968)

Simulation of a loss of coolant accident without high pressure injection but with secondary side bleed and feed : report of the IAEA Technical Co-operation Project on evaluation of safety aspects of WWER-440 model 213 nuclear power plants.
Published: (1995)

In-core fuel management benchmarks for PHWRs International Atomic Energy Agency.
Published: (1996)