Cover Image

QR Code

Non-destructive testing of large-diameter pipe for oil and gas transmission lines

Other Authors:	Weisweiler,, Sergeev,
Language:	English
Published:	Weinheim, Federal Republic of German: VCH Verlagsgesellschaft, 1987.
Subjects:	Non-destructive testing Pipe, Steel -- > Testing Petroleum pipelines -- > Testing Natural gas pipelines -- > Testing

Similar Items

Analysis of weld cracking in piping of petrochemical plant Mohd. bin Harun et al.
by: Mohd. bin Harun et al.
Published: (2006)

Plastic pipe systems : failure investigation and diagnosis Mehdi Farshad.
by: Farshad, Mehdi
Published: (2006)

Pipe protection : a review of current practice U. Hassan, C.E. Jewsbury, A.P.J. Yates.
by: Hassan
Published: (1978)

Methods for non-destructive testing of pipes and tubes. Part 1A. Ultrasonic testing of ferrous pipes (excluding cast) British Standards Institution.
Published: (1965)

Procedures and recommendations for the ultrasonic testing of butt welds.
Published: (1971)

Handbook on the ultrasonic examination of welds compiled by Commission V- Testing, measurement and control of welds of the International Institute of Welding.
Published: (1977)

The identification of piping conduits and ducts Standards Association of Australia.
Published: (1972)

Size measurement and characterisation of weld defects by ultrasonic testing. Part 1 : non-planar defects in ferritic steels.
Published: (1979)

Standard test method for disbonding characteristics of pipeline coatings by direct soil burial.
Published: (2005)

Underground pipeline corrosion : detection,analysis and prevention edited by Mark E. Orazem.
Published: (2014)

Guide for the nondestructive inspection of welds AWS Committee on Methods of Inspection.
Published: (1985)

Guide for the nondestructive inspection of welds AWS Committee on Methods of Inspection.
Published: (1977)

Fluid transients in pipe networks A. Betamio de Almeida, E. Koelle.
by: Almeida
Published: (1992)

Rekabentuk dan pembangunan sistem pengkelasan kecacatan logam terkimpal masa-nyata Suhairy Bin Sani.
by: Suhairy Bin Sani
Published: (2009)

Methods for non-destructive testing of steel forgings. Part 1. Ultrasonic flaw detection British Standards Institution.
Published: (1967)

Methods for non-destructive testing of steel forgings. Part 2. Magnetic particle flaw detection British Standards Institution.
Published: (1968)

Methods for non-destructive testing of steel forgings. Part 3. Penetrant flaw detection British Standards Institution.
Published: (1968)

Non-destructive examination in relation to structural integrity edited by R.W. Nichols.
Published: (1980)

Piping calculations manual E. Shashi Menon.
by: Menon
Published: (2005)

NDT aspects of the significance of weld defects : the proceedings of a SANDT Seminar, 16 December 1971 chairman, J. G. Young.
Published: (1978)

Quality assurance of welded construction edited by N. T. Burgess.
Published: (1983)

Pipelines. Part 1. Installation of pipelines in land British Standards Institution.
Published: (1966)

Design, fabrication, installation and inspection of pressure piping known as the SAA pressure piping code. Part I. Ferrous piping Standards Association of Australia.
Published: (1967)

On-line electrical troubleshooting Lynn Lundquist.
by: Lundquist, Lynn
Published: (1989)

Non destructive testing : magnetic particle : magnetic particle : classroom training handbook for basic grade prepared by NDT Group.
Published: (1989)

Methods for non-destructive testing of pipes and tubes. Part 2A. Eddy current testing of ferrous pipes and tubes British Standards Institution.
Published: (1965)

Methods for non-destructive testing of pipes and tubes. Part 3A. Penetrant testing of ferrous pipes and tubes British Standards Institution.
Published: (1965)

Plate inspection programme. PISC : report from the Plate Inspection Steering Committee (PISC) on the ultrasonic examination of three test plates using the "PISC" procedure based upon the ASME XI code.
Published: (1979)

Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels American Society for Testing and Materials.
Published: (1985)

Ultrasonic examination of steel pipes and tubes Japanese Standards Association.
Published: (1978)

Symposium on Non-Destructive Testing of Concrete and Timber organized by the Institution of Civil Engineers and the British National Committe for Non-destructive Testing 11-12 June 1969.
Published: (1970)

Methods for non-destructive testing of pipes and tubes. Part 4A. Magnetic particle flaw detection : ferrous pipes and tubes British Standards Institution.
Published: (1965)

Practical non-destructive testing Baldev Raj, T. Jayakumar, M. Thavasimuthu.
by: Raj, Baldev, 1947-
Published: (2007)

Pipe line corrosion and cathodic protection : a practical manual for corrosion engineers, technicians, and field personnel Marshall E. Parker, Edward G. Peattie.
by: Parker, Marshall E.
Published: (1984)

Natural gas : prospect to 2000 International Energy Agency.
Published: (1982)

Methods for non-destructive testing of pipes and tubes. Part 2B. Eddy current testing of non-ferrous tubes British Standards Institution.
Published: (1966)

Non-destructive characterization of materials VII : proceedings ... editors, Anthony L. Bartos, Robert E. Green, Jr., Clayton O. Ruud.
Published: (1996)

The Status of NDE of non-metallic materials in Malaysia; paper presented at Workshop on Non-Destructive Examination of Non-Metallic Materials at JSNDI, Tokyo 25-29 September 1989 Abdul Aziz Mohamed, Azmi Idris, Ab. Razak Hamzah, Shamsul Azhar Mohd Yusof.
by: Abdul Aziz Mohamed
Published: (1989)

Recommendations for non-destructive methods of test for concrete. Part 2. Strain gauges for concrete investigations British Standards Institution.
Published: (1969)

Recommendations for non-destructive methods of test for concrete. Part 1. Electromagnetic cover measuring devices British Standards Institution.
Published: (1969)